Dynamic Simulation and Control of Chemical Processes - using MATLAB & Simulink

Home -> Lecture Notes ->

MATLAB - A Powerpoint Presentaion of Tutorials

Examples from Chemical Reaction Engineering
1	Solving simultaneous differential equations: tworxns.m; tworxns.mat
2	Dynamics of Semibatch Reactor: semibatch.m
3	Dynamics of CSTR: cstrrxns.m; cstrrxns.mat
Examples from Chemical Engineering Thermodynamics
4	Using two dimensional interpolation function 'interp2' to find Compressibility Factor(Z) of a gas Zvalue.m; CompressFactor.mat
5	Volume of Nonideal gases from Various equations of State: assign1.m; pvt_data.mat; v_vander.m; v_redlich.m; Z.m; pvt_result.mat; pvt_result.dat
6	Bubble point & Dew point calculautions: sat_pr_antoine.m - Vapor pressure from Antoine equation sat_temp_antoine.m - Saturation temperature from Antoine equation BUBL_P.m - Bubble point vapor composition and Pressure BUBL_T.m - Bubble point vapor composition and Temperature DEW_P.m - Dew point liquid composition and Pressure DEW_T.m - Dew point liquid composition and Temperature

Simulink

View Snapshot	Download Simulink .mdl file
Laplace Domain Dynamics:
Second order Transfer function - Step change in set point	SecondOdrTransferFunction.mdl
Feedback control of two first order in series	FeedbackControl.mdl
PID controller	PID_Controller.mdl
PID controller - Step change in set point	PID_StepChangeInSetPoint.mdl
PID controller - Step change in load - 1	PID_StepChangeInLoad_1.mdl
PID controller - Step change in load - 2	PID_StepChangeInLoad_2.mdl
Time Domain Dynamics:
Solution to First order ODE	FirstOrderODE.mdl
Liquid level Dynamics	LiquidLevelDynamics.mdl
Solution to Two first order Equations - 1	TwoFirstOrderODE_1.mdl
Solution to Two first order Equations - 2	TwoFirstOrderODE_2.mdl
Solution to Second order ODE - 1	SolutionToSecondOrderODE_1.mdl
Solution to Second order ODE - 2	SolutionToSecondOrderODE_2.mdl
Feedback Control of tank level	TimeDomain_ControlofTankLevel.mdl
Impulse input to two non-interacting tanks in series	TwoTanksInSeriesImpulseInput.mdl
Soltion to Simultaneous non-linear equations
Concentration of A, B, C & D in a CSTR	NonLinearEquations.mdl simult.mat - this is the data file having the rate constants and initial conditions.
Bubble point & Dew point Calculations
Vapor Pressure from Antoine Equation Constants	VapPress.mdl
Saturation Temperature from Antoine Equation Constants	Sat_Temp.mdl
Dew Pressure and Composition	DEW_PX.mdl
Bubbl Pressure and Composition	BUBL_PY.mdl

Instructions for using these files (for the beginners):

• If these files are opened as text files by your browser, just save them as .mdl files.

• Using Simulink you can open the files, and run the simulation to get the results.

• The results are in the form of either display in scope or as output to a .mat file.

• In case of scope output just doubleclick the scope-icon to get the graphical output.

• In case of .mat file output, from Matlab command prompt, issue the command load filename and then type the variable name to get the output. These variable name is obtained by seeing the paramaters in the .mat file.